Microprocessor control panels type “Intellilevel SLC/C ”, for the control of liquid in vertical surface tanks.
Microprocessor control panels type “intellilevel” SLC/C allow us to check the level of liquid in the tank at any time. The level transducer that comes with this type of control panel is designed to be immersed in water therefore it is suitable for fixing on a vertical tank either on the inside or the outside.
The control panels type SLC are designed to control the gas supply pump in mobile distributors. This type of pump has a precision of ± 1% and also gives the possibility to set the density of the liquid as required between 0 ÷ 2y.
H=250mm W=185mm D=115mm
DIME OF IMPLANTATION H= 142,5mm W= 97,5mm
THE SYSTEM INCLUDES:
- Level transducer type TDL1: included in the price of the control panel, cable length maximum 2mt.
- Control panel
THE CONTROL PANEL INCLUDES
- Liquid crystal display showing data and alarms
- Main switch with door lock
- Plastic box
- Mother card with electronic parts
- Maximum power of the motor 1.1KW single phase, 4 KW three-phase
- Buttons used for the data setting, gear operating and stopping of the pump
- Electric card with micro controller for data processing
- Visualisation of the height of the liquid in cm with decimal point
- Visualisation of the electrical input
- Visualisation of the sequence or missing phases (only three-phase)
- Visualisation of reserve
- Visualisation of empty (pump stops)
- Possibility to modify the height of the minimum level from 0¸200cm, 0¸350cm or 0¸750 cm
- Possibility to regulate the level of RESERVE and EMPTY from 0¸200cm
- Possibility to regulate the input absorbed from the motor from 0¸to 10A (0¸25A)
- Led line, led alarms, led gear pump.
OPTIONAL
- Possibility to use alarms from a distance
ALARMS
- Maximum current in the motor
- Sequence or missing phase (only three-phase)
- Tank in reserve
- Tank empty
TECHNICAL INFORMATION
- Tension feed: 230/400V 50/60Hz ± 10%
- Maximum height of the liquid: 2mt, 3, 5mt, 7.5mt depending on the type of transducer used Level indicator in cm with decimal point
- Length of the transducer cable: 1.8mt with the possibility to request a different length up to a maximum of 50 mt
- Potential free contact 250V/5A to show at a distance the alarm sounded
- Precision: +- 1% F.S.
- Linearity: 0.2% in the intermediate values
- Level of protection: IP55
- Working temperature: -25°C/+ 50°C
- Humidity 50% at a temperature of 50°C
VISUALISATIONS
- Level of the liquid
- Electrical input from the motor
- Reserve
- Empty
- Volume in litres
- Display of the sequence or missing phases (only three-phase)
TECHNICAL DATA OF THE CONTROL PANELS TYPES Intellilevel SLC/M, SLC/T, SLC/C/M, SLC/C/T SLC1 AND SLC1/C
- Tension feed 230/400V. 50/60Hz. ± 10%
- Maximum height of the liquid depends on the type of level transducer used; 2mt., 3,5mt, 7,5mt
- Indication of liquid level in cm with decimal point
- Free contact potential 250V/5A to see from a distance the cumulative alarms (optional)
- Level of protection IP55
- Working temperature –25°C / 50°C
- Relative humidity 50% at a temperature of 50°C
- Maximum length of the cable from the transducer to the control panel 50mt
Intellilevel SLC models
| CONTROL PANEL TYPE | MAX. POWER TO 230V. MONOPHASE | MAX. POWER TO V.230 TRIPHASE | MAX. POWER TO V.400 TRIPHASE | MAX. CURRENT ADJUSTABLE |
DIMENSIONS IN mm | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| KW | HP | KW | HP | KW | HP | H | W | D | ||
| CDL1 | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 25A | 240 | 180 | 115 |
| CDL2 | 5A | 110 | 150 | 75 | ||||||
| SLC/M | 1.1 | 1.5 | 25A | 240 | 180 | 115 | ||||
| SLC/T | 2.2 | 3 | 4 | 5.5 | 25A | 240 | 180 | 115 | ||
| ALC/C/M | 1.1 | 1.5 | 25A | 240 | 180 | 115 | ||||
| SLC/C/T | 2.2 | 3 | 25A | 240 | 180 | 115 | ||||
| SLC1 | 5A | 110 | 150 | 75 | ||||||
| SLC1/C | 5A | 110 | 150 | 75 | ||||||
RELATED PRODUCTS
Microprocessor control panels type Intellilevel SLC
Microprocessor control panels type Intellilevel SLC1
Microprocessor control panels type Intellilevel SLC1/C